Hidden Deck Fasteners
Information on Deck Fastening Systems & Decking Products

Choices, choices, and more choices…..

Although hardwood decking tops the list as the most used decking material, recently there has been a burst of interest shown in PVC decking. Although we, at Ipe Clip®, still prefer a beautiful hardwood Ipe deck, the interest shown in PVC decking is certainly cause for review.
PVC decking is installed quite similar to hardwood decking. You want to start with a ground clearance of at least 12” to allow for adequate air flow. We recommend that joist spacing not exceed 16” on center when perpendicular to joists and no more than 12” when deck boards are positioned at a 45 degree angle.

There are major differences between hardwood deck boards and PVC deck boards:

1.     The movement each makes over time is different. While hardwood decking will naturally move on its width, PVC decking will naturally move on its length.

2.    Hardwood deck board’s movement is primarily dependent upon moisture content while PVC deck boards are primarily dependent upon temperature changes.

3.    Ipe Clip® hidden deck fasteners are installed with the screw at a 45 degree angle, through half of the deck board, and then down into the joist. PVC decking will be installed using the very same Ipe Clip® hidden deck fasteners except the screw will be driven straight down through the fastener and into the joist allowing for the natural movement on its length.

Don’t be intimidated by all the choices that are now available for your decking needs. PVC decking can be installed just as easily as hardwood decking. There are no additional tools or equipment required. Ipe Clip® makes a hidden deck fastener for each decking project no matter the type of decking. Just give us a call and we’ll be happy to help you choose the right products for your decking needs.