Applying a deck finish with Ipe Oil™ is fast, easy, and very rewarding.

Every day I field calls from new proud owners of Ipe decks; or other decks built with exotic hardwood decking materials. They are always filled with excitement and ready to unveil it at there next barbecue. However the last step to finishing off your newly built masterpiece is applying a hardwood deck finish. An oil based hardwood deck finish not only protects your investment; but also gives it that beautiful finished look.

We recommend Ipe Oil™ which was specially formulated for Exotic Hardwoods. Some people think that your average decking oil will penetrate these extremely dense materials; but think again. It takes a very special formula to penetrate these hardwood materials; that not every brand is designed to do.

We recommend 6 steps in applying the Ipe Oil™ hardwood decking finish to ensure a perfect look:

1. Clean the deck surface thoroughly to make sure it is completely free of debris or foreign residues of any kind. Also make sure that if you have stained or painted your deck in the past that it is completely removed.
2. Stir well initially and during use. Intermix all containers of the same color to ensure uniform appearance.
3. Apply a small amount to test area to ensure complete penetration and color satisfaction before proceeding with the entire project.
4. Recommended Method: Roll on decking with a 3/8” nap paint roller. Alternative Method: Apply with quality bristle brush, or airless sprayer. Back brush or back roll if applied by spray.
5. Apply a uniform even coat. Stain the full length of the boards, keeping a wet edge. One coat is sufficient for most applications. On decks wipe up any excess product that is not absorbed within 5 minutes to prevent tackiness and surface sheen.
6. Finally clean application equipment with mineral spirits (paint thinner).

Once you have completed the following steps we recommend that you allow the deck to dry for 24 to 48 hours depending on your climate. This method should be followed for the first 2 years, and then from there you can skip every other year depending on UV exposure and weather.

Now you are ready to send out the BBQ invites and dazzle everyone with your beautiful new deck!

Learn more about Ipe Oil™.

Here’s a handy presentation on how easy it is to apply Ipe Oi™ Deck Finish to your exotic hardwood deck. Contact Ipe Clip® today to get this deck oil finish product on your shelves today.

By now, you already know that the Hardwood Wrench™ is the world’s strongest deck tool.

For contractors & deck builders in particular, this deck board straightening tool will last longer than any other tool on the market.

How can you be sure that the Hardwood Wrench™  is worth the investment?

1- Made by and for deck builders. The Hardwood Wrench™ is the only deck tool on the market designed for deck builders in mind. This is not a “one off” tool that you have to throw away after it bends out of shape, or becomes unusable. In fact, it’s been specifically designed to be used again and again and again. You never have to settle for a weak tool again.

2- Max bending power. The claim that the Hardwood Wrench™ is the strongest deck tool for hardwood decking has been scientifically proven. With a maximum bending force of 1078 lbs, our decking tool offers strength that is up to 80% more than other tools tested.

3- Easily adjustable. Not only can you adjust to various joist sizes, but the handle is also reversible.

4- Bend the strongest hardwoods with one fluid motion. No more pulling and wrenching your back. This deck tool was designed to take all the force so that you don’t have to exert much energy.

5- Do you work with wood, composite decking, or PVC? Regardless of the material, you can depend on the Hardwood Wrench™.

To learn more about the most talked about deck tool in the market today, check out the Hardwood Wrench website or call: 1-866-427-2547.